If you want to maintain your pool, you should be aware of the 12 warning signs your pool deck needs refinishing. If you notice large structural cracks, rough spots on the floor, peeling plaster, or algae, it is likely time for a resurface. To get a better idea of how often you should do this, read on! We will cover all the signs and help you determine if it’s time for a resurfacing project.
Large structural cracks
The first step in repairing a pool deck with large structural cracks is to locate the source of the problem and eliminate the source. This can be the soil, the materials used, or how the pool was installed. Once the source of the crack is identified, it must be cleaned thoroughly and prepared for repair. An experienced pool repair specialist will use lightweight technology to lock both sides of the crack together and seal the repaired area with an industrial-grade epoxy paste.
Often, small cracks can grow into larger structural issues. If left untreated, these cracks will spread and compromise the structure of your pool. While minor cracks may be easy to repair, larger structural cracks can weaken the foundation. When resurfacing your pool deck, you can either repair the problem yourself or hire a contractor to do the job. However, you can purchase patching products if you are unsure of your abilities.
Rough spots on the pool floor
Having a pool with visible wear and tear on its floor can compromise your pool’s safety. The good news is that concrete resurfacing can solve these problems and restore your deck to its original look. If you notice these signs, you might be due for a concrete resurfacing job. Read on to learn more about concrete resurfacing. If you’ve been delaying a concrete resurfacing project, now is the time to make a move.
Raised, rough spots on the floor are the first sign that your pool deck needs resurfacing. These areas are potentially slippery, which can be a serious safety issue. A concrete resurfacing project can provide your pool with the traction and support your bare feet need to be safe.
If you notice any rough spots on the deck, you should make an appointment to have it resurfaced. A rough spot on your pool floor is another common sign that your deck needs resurfacing. If this is the case, the cost of a resurfacing project will be lower than that of the resurfacing.
Peeling plaster
If you notice that the plaster on your pool steps or the sides has started to fade, it’s time to resurface your swimming pool. Over time, exposure to sunlight and harsh chemicals can cause your pool’s plaster surface to peel. Not only is this unsightly, but it’s also potentially dangerous. Typically, pool plaster lasts seven to 10 years before it needs resurfacing.
Resurfacing your pool deck is a big project, but a knowledgeable pool owner can complete it. Generally, a pool deck needs resurfacing every eight to ten years because exposure to sunlight and chemicals eat away at the plaster over time. You should consider getting a professional estimate since most resurfacing estimates cover only the essential materials used. Moreover, these quotes don’t include extensive repair work or extra equipment that you might need.
Algae
If your swimming pool has a green tint, you likely have algae growing on it. It is a hard nut to crack. Algae are more difficult to remove from concrete than wood, so it is important to keep your pool area clean. In addition, you should replace any damaged or worn pool toys. In the worst-case scenario, you may need to replace the deck completely.
A pool with algae can begin to look unclean and unsightly. Discoloration often correlates with the amount of use. Those algae are actually stains caused by minerals, debris, and chemicals. If you have algae that are green or red in color, it may be time for a resurfacing. It can be challenging to clean the algae, and even worse, it can be toxic. Another sign that your pool deck may need resurfacing is a rough texture. The uneven texture may cause water to collect and seep into cracks.
If you are worried about algae, make sure to check the pH level of your water. This is essential when using algaecide treatments. Remember to keep your pH level in the 7.2 range. If your pH level is starting to rise, have a pH down handy to adjust it if necessary. Once you’ve done that, it’s time to resurface your pool deck.
Cracks
Deep cracks in concrete are not a good sign. They may be caused by a deeper issue, such as a problem with the concrete mix ratio or subgrade. Minor cracks in concrete are often easily covered or filled by pool deck resurfacing. This process can give the entire deck a fresh look. When it comes to resurfacing, it is best to hire a professional to come out and examine the concrete deck before you put your house on the market.
Concrete cracks will affect your pool deck’s aesthetic appeal, but they do not necessarily mean that the entire deck needs resurfacing. The natural process of cement hydrating causes large cracks. Small cracks will become noticeable over time, eventually leading to structural damage. Then, cracks may also be caused by the movement of the ground, such as from extreme temperatures.
Mold
If you notice mold and algae on your pool deck, it’s time to have it resurfaced. Pool decks are usually made of several slabs that settle into the ground over time. The pool is a perfect breeding ground for molds, and the conditions around it also encourage algae and fungus growth. Fortunately, simple cleaning can remove a great deal of mold and algae, but if you see more than a few molds, it’s time to consider a pool deck resurfacing project.
While mold is a cosmetic issue, stains are a structural issue that may require resurfacing. While some stains are easy to remove by power washing, others may require extensive work, such as replacing the concrete slab. Additionally, cracks in the walls can signify structural weakening, which can bring the entire pool deck to its knees. Water leakage can also cause expensive bills.
While proper maintenance and cleaning methods can help prevent mold and algae from forming on pool deck surfaces, these chemicals can still cause mold and algae growth. In addition to causing a musty smell, water that seeps through the floor will cause stains on the concrete and framing components. Professionals can strip off the stains and restore your pool deck to its former glory.
Staining
If your pool is stained, it’s probably time to have it resurfaced. The stains can cause the surface to look dingy and old, and they can even rust. Luckily, there are ways to prevent these problems. Resurfacing your pool deck will not only restore the surface’s original appearance but will also restore the structural integrity of the pool.
While staining can be a sign your pool deck needs resurfacing, it’s not always a cause for alarm. Some stains are harmless and can be cleaned easily, but if the stains persist and grow in size, it’s time to get a new surface.
When it comes to staining on your pool deck, there are a variety of reasons why. The most common causes of stains include chemicals and improper cleaning. But sometimes, the cause is something more serious than just chemical balance issues. For example, cracks in the plaster may allow bacteria to accumulate and cause staining. This is a good time to have your pool deck resurfaced.